Main Article Content

Authors

Alhayat Getu Temesgen*
Adane Workneh

Abstract

This study reports the development of biodegradable soil erosion-control mats using Enset pseudostem fibers reinforced with plant-derived polymers and natural tackifying agents. The fibers were sustainably extracted, spun into threads, and woven into durable mats, followed by a plant-based polymer coating to enhance structural integrity and environmental resistance. Experimental results demonstrated that mat performance is highly sensitive to formulation parameters, including thickness, polymer concentration, and tackifying agent levels. Tensile strength peaked at 498 N for a 10 mm thick mat with 5% polymer and 2% tackifier, whereas a 15 mm mat with 30% polymer and 0.1% tackifier exhibited lower tensile strength (170 N), indicating that lower polymer concentrations combined with higher tackifier levels enhance mechanical durability. Water permeability was higher in mats with lower polymer content (5%), while denser formulations with higher polymer concentrations reduced flow, and soil retention ranged from 86–98%, with optimal retention achieved at moderate thickness, high polymer, and tackifier levels. Comparisons with conventional natural-fiber mats (coir, jute, banana) indicate that Enset fiber mats provide a competitive balance of mechanical strength, water permeability, and soil retention while offering advantages of local availability and sustainability. Overall, the results highlight the potential of Enset pseudostem fibers as eco-friendly alternatives to synthetic erosion-control materials and provide a framework for optimizing mat formulations for application-specific performance.

Keywords:
Erosion control mat, Water permeability, Soil retention, Tensile strength

Article Details

References

[1]Dube, A. M. (2022). Isolation and characterization of cellulose nanocrystals from Ensete ventricosum pseudo-stem fiber using acid hydrolysis. Biomass Conversion and Biorefinery, 15(23), 30139–30154. https://doi.org/10.1007/s13399-022-02987-z

[2]Abubakar, I. R., Maniruzzaman, K. M., Dano, U. L., AlShihri, F. S., AlShammari, M. S., Ahmed, S. M. S., Al-Gehlani, W. A. G., & Alrawaf, T. I. (2022). Environmental sustainability impacts of solid waste management practices in the global South. International Journal of Environmental Research and Public Health, 19(19), 12717. https://doi.org/10.3390/ijerph191912717

[3]Markiewicz, A., Koda, E., Kiraga, M., Wrzesiński, G., Kozanka, K., Naliwajko, M., & Vaverková, M. D. (2024). Polymeric products in erosion control applications: A review. Polymers, 16(17), 2490. https://doi.org/10.3390/polym16172490

[4]Daba, T., & Shigeta, M. (2016). Enset (Ensete ventricosum) production in Ethiopia: Its nutritional and socio-cultural values. Agriculture and Food Sciences Research, 3(2), 66–74. https://doi.org/10.20448/journal.512/2016.3.2/512.2.66.74

[5]Aneseyee, A. B., Yitbarek, T., & Hailu, Y. (2022). Enset plant (Ensete ventricosum) for socio-economic and environmental uses in Gurage area of Ethiopia. Environmental and Sustainability Indicators, 16, 100203. https://doi.org/10.1016/j.indic.2022.100203

[6]Tsegaye, A., & Struik, P. C. (2002). Analysis of enset (Ensete ventricosum) indigenous production methods and farm-based biodiversity in major enset-growing regions of southern Ethiopia. Experimental Agriculture, 38(3), 291–315. https://doi.org/10.1017/S0014479702003046

[7]Temesgen, A. G., & Sahu, O. (2014). Process ability enhancement of false banana fibre for rural development. Journal of Agricultural Economics, Extension and Rural Development, 1(6), 64–73.

[8]Temesgen, A. G., & Sahu, O. (2014). Green composite material from agricultural waste. International Journal of Agricultural Research and Reviews, 2(5), 56–62.

[9]Temesgen, A. G., Eren, R., & Aykut, Y. (2019). Investigation and characterization of fine fiber from enset plant for biodegradable composites. In 17th National and 3rd International Recent Progress Symposium on Textile Technology and Chemistry (pp. 356–361). Bursa, Turkey.

[10]Kaufmann, J., Temesgen, A. G., & Cebulla, H. (2025). A comprehensive review on natural fiber reinforced hybrid composites processing techniques, material properties and emerging applications. Discover Materials, 5, 227. https://doi.org/10.1007/s43939-025-00419-z

[11]Temesgen, A. G., Cebulla, H., & Kaufmann, J. (2025). Investigation of the sound absorption performance of cellulosic fine fibres fabricated from agricultural waste fibres. In Agricultural Sciences: Techniques and Innovations (Vol. 3, pp. 13–33). BP International. https://doi.org/10.9734/bpi/asti/v3/5262

[12]Morgan, R. P. C. (2005). Soil erosion and conservation (3rd ed.). Blackwell Publishing.

[13]Food and Agriculture Organization of the United Nations & Intergovernmental Technical Panel on Soils. (2015). Status of the world’s soil resources: Main report. FAO.

[14]U.S. Environmental Protection Agency. (2024). National Water Quality Inventory: Report to Congress (EPA Report No. 841-R-23-001). U.S. Environmental Protection Agency.

[15]Pimentel, D., & Burgess, M. (2013). Soil erosion threatens food production. Agriculture, 3(3), 443–463. https://doi.org/10.3390/agriculture3030443

[16]Lal, R. (2001). Soil degradation by erosion. Land Degradation & Development, 12(6), 519–539. https://doi.org/10.1002/ldr.472

[17]Intergovernmental Panel on Climate Change. (2022). Climate change 2022: Impacts, adaptation, and vulnerability. Cambridge University Press. https://doi.org/10.1017/9781009325844

[18]Gray, D. H., & Sotir, R. B. (1996). Biotechnical and soil bioengineering slope stabilization: A practical guide for erosion control. John Wiley & Sons.

[19]Mishra, A., & Das, D. (2020). Natural fiber-based geotextiles in erosion control applications. Journal of Natural Fibers, 17(8), 1181–1195.

[20]Arshad, M., & Coen, G. M. (1992). Characterization of soil structure and stability to water erosion. Canadian Journal of Soil Science, 72(3), 295–305

[21]Ahmed, A., & Rahman, M. M. (2017). Effectiveness of natural fiber erosion control mats in soil protection and vegetation growth. Ecological Engineering, 99, 84–95

[22]Temesgen, A. G., Eren, R., Aykut, Y., & Süvari, F. (2021). Evaluation of enset fabric reinforced green composite as sound absorber structure. Textile and Apparel, 31(2), 73–81. https://doi.org/10.32710/tekstilvekonfeksiyon.688371

[23]Temesgen, A. G., Eren, R., & Aykut, Y. (2021). Green synthesis of cellulosic nanofiber in enset woven fabric structures via enzyme treatment and mechanical hammering. Textile and Apparel, 31(1), 63–72. https://doi.org/10.32710/tekstilvekonfeksiyon.764976

[24]Aneseyee, A. B., Yitbarek, T., & Hailu, Y. (2022). Enset plant (Ensete ventricosum) for socio-economic and environmental uses in Gurage area of Ethiopia. Environmental and Sustainability Indicators, 16, 100203. https://doi.org/10.1016/j.indic.2022.100203

[25]Temesgen, A. G. (2021). A research on the use of enset woven fabric structures for the applications of sound absorption and biodegradable composite material development [Doctoral dissertation, Bursa Uludağ University].

[26]Temesgen, A. G. (2019). False banana fiber process ability enhancement for composite and industrial process ability enhancement of false banana fiber.

[27]Temesgen, A. G., & Kemal, S. (2025). Sustainable recycled cotton fabric and clay powder composites for improved thermal and mechanical performance in home furniture. Climate-Adaptive Materials Engineering, 1(1), 12–27. https://doi.org/10.65773/came.1.1.45

[28]Temesgen, A. G., Eren, R., & Aykut, Y. (2024). Investigation of mechanical properties of a novel green composite developed by using enset woven fabric and bioresin materials. Polymer Bulletin, 81(5), 4199–4219. https://doi.org/10.1007/s00289-023-04905-3

[29]Shepley, B., Smith, R., & Jackson, G. L. (2002). Market analysis of erosion control mats (Research Note FPL-RN-0284). U.S. Department of Agriculture, Forest Service, Forest Products Laboratory.

[30]Temesgen, A. G., & Sahu, O. (2022). Comparative study on the mechanical properties of weft knitted and warp fabric reinforced composites. Journal of Modern Materials, 9(1), 21–25. https://doi.org/10.21467/jmm.9.1.21-25

[31]Temesgen, A. G., Eren, R., Aykut, Y., & Sahu, O. (2021). Effect of the quantity of bio resins on the acoustic performance of agro waste enset woven fabric reinforced composite. Exploratory Materials Science Research, 2(1), 43–49. https://doi.org/10.47204/EMSR.2.1.2021.43-49

[32]Temesgen, A. G., & Eren, R. (2024). A comparative study on the acoustic absorption properties of green synthesis cellulose nano enset fibers. Polymer Bulletin, 81(8), 7089–7104. https://doi.org/10.1007/s00289-023-05050-7

[33]Temesgen, A. G., & Sahu, O. (2021). Chemical and enzyme treatment of enset yarn for technical textile applications. Advances in Applied NanoBio-Technologies, 2(3), 1–8. https://doi.org/10.47277/AANBT/2(3)8

[34]Temesgen, A. G., Eren, R., Aykut, Y., & Sahu, O. (2021). Effect of the quantity of bio resins on the acoustic performance of agro waste enset woven fabric reinforced composite. Exploratory Materials Science Research, 2(1), 43–49. https://doi.org/10.47204/EMSR.2.1.2021.43-49

[35]Roy, S. S., et al. (2021). A review on coir fiber reinforced composites. RSC Advances, 11, 1–4.

[36]Błędzki, A. K., & Gassan, J. (1999). Composites reinforced with cellulose based fibres. Progress in Polymer Science, 24(2), 221–274. https://doi.org/10.1016/S0079-6700(98)00018-5

[37]Jayaramudu, R., et al. (2015). Lignin content and structure in coir fiber. Surface Engineering and Applied Chemistry.

[38]Mukherjee, D., et al. (2020). Characterization of jute fibers for engineering applications. Materials Today.

[39]Islam, M. A., & Rahman, M. M. (2018). Mechanical characterization of jute fibers. International Journal of Engineering Materials..

[40]Yan, C., et al. (2020). Mechanical behavior of natural bast fibers. ES Materials & Manufacturing.

[41]S. Behera et al. (2021). Properties of banana pseudostem fibers: A review, Textile Value Chain Journal,1-7.

[42]Markiewicz, A., Koda, E., Kiraga, M., Wrzesiński, G., Kozanka, K., Naliwajko, M., & Vaverková, M. D. (2024). Polymeric products in erosion control applications: A review. Polymers, 16(17), 2490. https://doi.org/10.3390/polym16172490

[43]Bekraoui, N., El Qoubaa, Z., Chouiyakh, H., Faqir, M., & Essadiqi, E. (2022). Banana fiber extraction and surface characterization of hybrid banana reinforced composite. Journal of Natural Fibers, 19(16), 12982–12995. https://doi.org/10.1080/15440478.2022.2080789

[44]Badanayak, P., Jose, S., & Bose, G. (2023). Banana pseudostem fiber: A critical review on fiber extraction, characterization, and surface modification. Journal of Natural Fibers, 20(1), 2168821. https://doi.org/10.1080/15440478.2023.2168821

[45]Li, K., Fu, S., Zhan, H., Zhan, Y., & Lucia, L. A. (2010). Analysis of the chemical composition and morphological structure of banana pseudo-stem. BioResources, 5(2), 576–585. https://doi.org/10.15376/biores.5.2.576-585

[46]Temesgen, A. G., Turşucular, Ö. F., Eren, R., & Aykut, Y. (2020). Potential of Ethiopian Enset fiber for textile application. In Proceedings of the 6th International Fiber and Polymer Research Symposium (6th IF&PRS), Bursa Uludağ University, Bursa, Turkey.

[47]Balakrishnan, S., Wickramasinghe, G. L. D., & Wijayapala, U. G. S. (2021). Investigation on mechanical and chemical properties of mechanically extracted banana fibre in pseudostem layers: From Sri Lankan banana (Musa) cultivation waste. Journal of Engineered Fibers and Fabrics, 16. https://doi.org/10.1177/15589250211059832

[48]Lih, T. C., Azmi, A. I., & Muhammad, N. (2016). Delamination and surface roughness analyses in drilling hybrid carbon/glass composite. Materials and Manufacturing Processes, 31(10), 1366–1376. https://doi.org/10.1080/10426914.2015.1103864

[49]Rao, G. D., Reddy, K. S., Rao, P. R., & Rao, P. M. (2017). Influence of fiber parameters on mechanical behavior of banana fiber based epoxy composites. International Journal of Current Advanced Research, 6(12). https://doi.org/10.24327/ijcar.2017.4700.0560

[50]Indira K. N. and Kiran M. J. 2021. Mechanical properties evaluation of banana fibre reinforced polymer composites: A review, Acta Innovations, no. 42, pp. 43–54.

[51]Characteristics & Properties of Banana Fibers, Textile Value Chain Journal, 2021.

[52]Adajar, M. A., Cutora, M., Bolima, S. J., Chua, K. J., Isidro, I. A., & Ramos, J. V. (2023). Strength performance of nonwoven coir geotextiles as an alternative material for slope stabilization. Applied Sciences, 13(13), 7590. https://doi.org/10.3390/app13137590

[53]Lee G. S. K.1984. Typical properties of jute fibres and jute fabrics for geotextiles,” Jute.com Proceedings, National University of Singapore, pp. 21–25,.

[54]Textile Blog. (2021). Physical, chemical and mechanical properties of jute fibre. Textile Blog.

[55]Nguyen, T. T., & Indraratna, B. (2023). Natural fibre for geotechnical applications: Concepts, achievements and challenges. Sustainability, 15(11), 8603. https://doi.org/10.3390/su15118603

[56]Das, H., Saikia, P., & Kalita, D. (2015). Physico-mechanical properties of banana fiber reinforced polymer composite as an alternative building material. Key Engineering Materials, 650, 131–138. https://doi.org/10.4028/www.scientific.net/KEM.650.131